NanoVACQ Deformation

Measures the dimensional changes in trays, pouches, cans or other packaging...

Measures the dimensional changes in trays, pouches, cans or other packaging, during thermal processes like cooking or sterilization.

The NanoVACQ Deformation is used with a positioning for rotary or static autoclave.

No calibration certificate is delivered.

Master package deformation during your heat processes by combining deformation / deflection measurement and pressure measurement with TMI-Orion solution.

Measuring package deformation / deflection helps maintaining package integrity, which is critical for safety, shelf life and appearance.

Measure physical deformation (deflection) of the food package, for example, the expansion or contraction of flexible packages in static or rotary processes.

This delivers the information required to develop your over pressure profile or sealing conditions to prevent package ruptures or paneling.

Measuring pressure in the autoclave and in the packages helps validate the sterilization cycle by confirming that conditions stayed within the required thresholds.

Measure the internal pressure inside the autoclave chamber during sterilization, and/or inside the different packages. One or two pressure loggers can be used simultaneously to optimize the process analysis. It helps you:

Check that the equipment (autoclave/oven) maintains the correct pressure during the process,
Measure the differential pressure applied to the packaging.

Together, these loggers help you:

Correlate pressure conditions with package behavior,
Design heat processes that are effective and gentle (maintain package integrity),
Validate and document compliance with regulatory standards (e.g. FDA, EU food safety),
Optimize overpressure monitoring to match package needs,
Avoid air trapped inside the chamber (which reduces sterilization efficiency),
Check the steam was saturated,
Know if the equipment pressure sensor in chamber if fully functional and representative of load conditions.