NanoVACQ Deformation
Messung der Dimensionsveränderungen von Dosen, Schalen, Beuteln, Foliendeckeln usw.
Messung der Dimensionsveränderungen von Dosen, Schalen, Beuteln, Foliendeckeln und anderen Verpackungsformaten im Verlauf von thermischen Prozessen wie Kochen oder Sterilisieren.
Eine Positionierungsvorrichtung wird mitgeliefert.
Ein Kalibrierschein wird nicht ausgestellt.
Master package deformation during your heat processes by combining deformation / deflection measurement and pressure measurement with TMI-Orion solution.
Measuring package deformation / deflection helps maintaining package integrity, which is critical for safety, shelf life and appearance.
Measure physical deformation (deflection) of the food package, for example, the expansion or contraction of flexible packages in static or rotary processes.
- This delivers the information required to develop your over pressure profile or sealing conditions to prevent package ruptures or paneling…
Measuring pressure in the autoclave and in the packages helps validate the sterilization cycle by confirming that conditions stayed within the required thresholds.
Measure the internal pressure inside the autoclave chamber during sterilization, and/or inside the different packages. One or two pressure loggers can be used simultaneously to optimize the process analysis. It helps you:
- Check that the equipment (autoclave/oven) maintains the correct pressure during the process,
- Measure the differential pressure applied to the packaging
Together, these loggers help you:
- Correlate pressure conditions with package behavior,
- Design heat processes that are effective and gentle (maintain package integrity),
- Validate and document compliance with regulatory standards (e.g. FDA, EU food safety),
- Optimize overpressure monitoring to match package needs,
- Avoid air trapped inside the chamber (which reduces sterilization efficiency),
- Check that the steam was saturated,
- Know if the equipment pressure sensor in chamber if fully functional and representative of load conditions.

NanoVACQ Deformation mit Positionierungsvorrichtung für statischen Autoklav

NanoVACQ Deformation mit Positionierungsvorrichtung für Rotationsautoklav
Die Lösungen von TMI-Orion umfassen:
- Einen oder mehrere autonome integrierte Datenlogger,
- Die Software Qlever, zur Erfassung, Visualisierung und Analyse der Messdaten,
- Eine Kommunikationsschnittstelle, kabelgebunden, funkfähig oder mit FullRadio-Option,
- Ein Wärmeschutzgehäuse für alle Prozesse, deren Temperatur die zulässige Betriebstemperatur des Datenloggers überschreiten.

