Our expertise
Continuous development of new standard solutions is combined with individual developments.
We offer advanced technologies intended for the design of measurement systems for industrial environments, such as: flexible probes, high pressure watertight connectics, power supply adapted to various industrial applications, thermal transfer, use of new materials in extreme conditions of temperature and pressure, specific probes, etc.
Une maîtrise des technologies les plus avancées permet à l'équipe de Développement de prendre en charge des projets dans les domaines suivants :
High temperature electronic systems
- Design of analog and digital electronic systems
- Data acquisition systems
- Wireless data transmission
- Large temperature range radio transmission
Software
- In house development of TMI-Orion software
- Interfacing with industrial systems under Windows
- Design of customized applications
Heat transfer
Development of thermal shields to retain heat transfer to the logger. Use in steam, vacuum, dry environments....
Industrial processes
Extended knowledge of industrial needs enables our R&D team to adapt the design to specific customer needs
Many original applications have been developped in industrial sectors such as food, hospitals, mechanical, etc ...
Technological expertise
Skills developed through our constant innovation process:
| Data storage
| Miniaturization
- Electronics down to 9x9 mm²
- Data logger down to 4 cm3
| Encapsulation
- Mechanical design
- Materials: Stainless Steel, thermoplastics, glass, Teflon, silicon,
- Water tightness
| Embedded Software expertise : ASM
| Architecture and software development expertise
- Data modelization and statistical analysis
- Compliance with programming standards of each industry (health, aeronautics,…)
- Industrial environment interfaces (communication bus/automats)
- PC, Smart phones, tablets OS
| High precision metrology (0.06°C, 10 mbar, 2% RH)
| Thermal transfer - Thermal shields up to 1300 °C
| High pressure
| Connectivity : wired, Radio and FullRadio®, real time bi-directional 2.4 GHz data transmission
| Multi sensor data loggers
- Various physical values,
- Up to 32 measurement channels
- Acquisition rate : from one acquisition per hour to 64 Hz
| Autonomy
- Energy supplied by battery or battery packs
- Ultra-low consumption system architecture for HW and SW
Metrology
Metrology laboratories
Our labs calibrate data loggers during the manufacturing process. Customers are invited to have their loggers calibrated or adjusted periodically or exceptionally.
We have developped the means and skills to carry out metrology operations for temperature, pressure and relative humidity.
TMI-USA laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
Calibration certificates
Each calibration or adjustment operation generates a calibration certificate which includes the collected data. Certificates issued by TMI-Orion are in compliance with norm NF X-07-012. The certificates issued by TMI-USA are in conformance with the norm ISO/IEC 17025/2017.
Metrology equipement
The set of equipment used in the lab has been selected among the most famous manufacturers. It fits the severe requirements demanded by TMI-Orion data loggers. Special tools have been designed in order to calibrate in close to customer use conditions.
The standards
The standards used to carry out the calibration operations are in compliance with our Quality Management System..
These standards are linked to the national primary standards through periodic calibration performed by COFRAC or accredited organizations that are recognized in most countries by international agreements.
Definitions taken from the "International Vocabulary of Fundamental and General Terms of Metrology" NF X 07-001.
Adjustment:
Operation of bringing a measuring instrument into a state of performance suitable for its use.
Uncertainty of measurement
Parameter associated with the result of a measurement, that characterizes the dispersion of the values that could reasonably be attributed to the measurand.
Calibration
Set of operations that establish, under specified conditions, the relationship between values of quantities indicated by a measuring instrument or measuring system, or values represented by a material measure or a reference material, and the corresponding values realized by standards
- Time stamped autonomous data loggers: VACQ®, NanoVACQ® , PicoVACQ® , MiniVACQ® , CeriDry®.
- Temperature, pressure, humidity, shrinkage, weight, anemometry.
- Battery autonomy: varies with the use, up to 400 hours at high temperatures..
- User replaceable battery packs
- Up to 32 measurement channels and 3 different physical values per data logger.
- Connectivity : wired USB interface, FullRadio® and radio.
- Data logger miniaturization: down to 4 cm3
- Qlever® Softawre for acquisition, visualization and analysis of measured data.
- IQ/OQ validation documents related to Qlever industry modules.
Services :
- Metrology laboratory: sensors calibration and adjusting
- After-sales services including metrology, maintenance, assistance, and hotline
- Customized specific solutions design and development of products and software

Over 200 products designed, developed and manufactured for a wide variety of applications:
Industrialization, manufacturing, quality
- Latest manufacturing techniques including test technologies, statistical control of processes, mechanical, electrical and thermal stresses.
- Quality Control techniques: data analysis, statistics, plans of experimentation, reliability engineering, failure mechanism analysis ...
- Our manufacturing team is certified IPC-A-610