- After the process, reading out the loggers memory is possible with a wired interface connected to any of our data loggers.
|Wired interface with the PC|
|The communication interface with the PC is a device that links the data logger to the PC. The transmission is done both ways in order to program the data logger and read out the data.|
The single and multi interfaces are equipped with an USB connector.
A single interface communicates with only one data logger while the multi interface communicates with 6 or 12 data loggers simultaneously. They are easily connectable and can form a daisy chain up to 96 data loggers with a simultaneous communication.
The new generation of TMI-Orion radio data loggers (NanoVACQ and VACQ families) uses 2.4GHz bandwidth. A wide range of loggers is offered in ISM transmitting bandwidth and is aimed at various application fields, among which sterilization, freeze-drying, pasteurization or long reach transmissions for industrial ovens... TMI-Orion radio loggers use the technology based on norm IEEE 802.15.4, which enables to manage various loggers in the same space.
|In order to answer a large number of applications, TMI-Orion radio loggers are equipped with a connectable antenna. A special connector ensures water tightness on a large range of pressure and vacuum. The receiving base station can be connected either directly by USB, or using a long distance connection RS485 type, or even using an Ethernet connection. This range of I/O's allows integrating the system in complex configurations. |
Real time data visualization and interpretation is done with QLEVER, a new software by TMI-Orion. Receiving and analyzing the data is done through its smart and user friendly interface.
|NanoVACQ PT 2.4 GHz||Receiver for radio transmission||NanoVACQ HT 2.4 GHz|