Pharmacy - Health Care - BioTech

PicoVACQ Temperature

PicoVACQ Temperature is a series of models offering a wide variety of temperature probes.
The smallest, PicoVACQ 1T, diameter 15 mm and height 22 mm, has an internal probe. 
PicoVACQ 1Tc can be manufactured with different probe sizes, diameter 3 mm and length up to 100 mm.

The PicoVACQ 1Td has a semi-rigid stainless steel probe or a flexible probe, diameter 2 mm, length up to 1000 mm. This model, associated with a thermal shield, is very well appreciated for depyrogenation processes.

A disconnectable probe version is also available, PicoVACQ 1Tdi.

All these models can operate up to 150°C and they are watertight. They can be immersed or used in steam environment. Their dimensions may vary with negative temperature range or with the type of semi-rigid and flexible probes.

data sheet

PicoVACQ Pressure and Temperature

The PicoVACQ PT is a data logger able to measure pressure and temperature from 0°C to 150°C up to 15 bar.
Its tiny dimensions, diameter 15 mm (16 mm at the top) and length 35 mm, make it very useful for manufacturing processes of small packagings like sprays. It can also be used in any steam sterilization application.

data sheet

  NanoVACQ 1Tc-2Tdi

All these models can operate up to 150°C and they are watertight. They can be immersed or used in steam environment. Their heights may vary with temperature range from 31 mm to 123 mm. They are the ideal data loggers for steam sterilization validation.

The models NanoVACQ 1Tc-2Td and the disconnectable probe version NanoVACQ 1Tc-2Tdi are very well adapted for freeze drying process.

datasheet

NanoVACQ Pressure and Temperature

The NanoVACQ Pressure and Temperature is a series of data loggers able to measure pressure and temperature inside autoclaves. For the most accurate data during transients, the NanoVACQ PT-Tc with a thin hybrid diameter probe is recommended. Associated with some NanoVACQ 1Tc , the group of data loggers constitute a complete validation system. 

Semi-rigid or flexible probes are also available instead of a rigid probe, NanoVACQ PT-Td. 

data sheet

NanoVACQ Humidity and Temperature

NanoVACQ HT 80 Ex for Ethylen oxyde sterilization control measures temperature and relative humidity.
Most of the NanoVACQ are available in Ex version.
data sheet

PicoVACQ HT and most of the PicoVACQ are available in Ex version.
data sheet

MiniVACQ Temperature

The MiniVACQ is an ideal temperature data logger for the washing-desinfection process.

data sheet

VACQ xFlat

The VACQ xFlat are thermocouple data loggers. They can be used for steam sterilization control. In this application the data logger is placed outside the autoclave. They can also be used inside depyrogenation process (dry heat) where the data logger is protected by a thermal shield.

The VACQ XFlat is available in 4, 8 or 16 thermocouples version. Dimension of model 4 thermocouples: 80x104x10 mm 

QLEVER Pharma 
compliant with FDA 21 CFR Part 11 

QLEVER Pharma takes you from a detailed programming Setup to a complete measurement report : description of test, description of the equipment, selection of loggers, position of loggers in the equipement, definition of calculations and events...

data sheet

Thermal shields

For any application at a temperature higher
than 150°C it is necessary to protect the
data logger with a thermal shield.

See our proposals

Communication with the data loggers can be done in various ways:

• Single USB interface
• Multi logger USB interface
• Radio transmission (all Radio NanoVACQ)