YOU NEED TO MONITOR, VALIDATE, EVEN CONTROL YOUR PROCESSES?
TMI-Orion will help you to find the best solution for measuring all the physical parameters you are dealing with in your processes: Steam sterilization, EtO sterilization, Depyrogenation, Freeze drying, Temperature monitoring ... A data processing software will assist you for a better process quality management in compliance with the norms FDA 21 CFR Part 11 and EN 554.
TEMPERATURE (Pt1000 or thermocouples), PRESSURE, HUMIDITY
TMI-Orion has a solution for each one of those parameters in accordance with the need of each process. Multi sensor data loggers with numerous probe combinations give a cost effective advantage for increasing the number of measurement points.
LIST OF PRODUCTS FOR PHARMACEUTICAL, HEALTH CARE AND BIOTECHNOLOGIES
PicoVACQ Temperature
PicoVACQ Temperature is a series of models offering a wide variety of temperature probes. The smallest, PicoVACQ 1T, diameter 15 mm and height 22 mm, has an internal probe. PicoVACQ 1Tc can be manufactured with different probe sizes, diameter 3 mm and length up to 100 mm.
The PicoVACQ 1Td has a semi-rigid stainless steel probe or a flexible probe, diameter 2 mm, length up to 1000 mm. This model, associated with a thermal shield, is very well appreciated for depyrogenation processes.
A disconnectable probe version is also available, PicoVACQ 1Tdi.
All these models can operate up to 150°C and they are watertight. They can be immersed or used in steam environment. Their dimensions may vary with negative temperature range or with the type of semi-rigid and flexible probes.
The PicoVACQ PT is a data logger able to measure pressure and temperature from 0°C to 150°C up to 15 bar. Its tiny dimensions, diameter 15 mm (16 mm at the top) and length 35 mm, make it very useful for manufacturing processes of small packagings like sprays. It can also be used in any steam sterilization application.
The NanoVACQ Temperature is a series of models which offers a wide variety of probe arrangements. The simplest, NanoVACQ 1Tc, diameter 31 mm and height 31 mm, can ne manufactured with different probe sizes, diameter 3 mm and length uo to 100 mm. The NanoVACQ 1Td has a semi-rigid stainless steel probe or a flexible probe, diameter 2 mm, length 1000 mm. Two or three probes are also available in various combinations of length and material, NanoVACQ 2Td, NanoVACQ 3Td.
All these models can operate up to 150°C and they are watertight. They can be immersed or used in steam environment. Their heights may vary with temperature range from 31 mm to 123 mm. They are the ideal data loggers for steam sterilization validation.
The models NanoVACQ 1Tc-2Td and the disconnectable probe version NanoVACQ 1Tc-2Tdi are very well adapted for freeze drying process.
The NanoVACQ Flat is a single temperature data logger. The temperature probe can be internal or have various sizes up to 100 mm. Its small size, diameter 40 mm and height 11 mm, makes it suitable for washing processes or any sterilization process.
The NanoVACQ Pressure and Temperature is a series of data loggers able to measure pressure and temperature inside autoclaves. For the most accurate data during transients, the NanoVACQ PT-Tc with a thin hybrid diameter probe is recommended. Associated with some NanoVACQ 1Tc , the group of data loggers constitute a complete validation system.
Semi-rigid or flexible probes are also available instead of a rigid probe, NanoVACQ PT-Td.
NanoVACQ HT 80 Ex for Ethylen oxyde sterilization control measure temperature and relative humidity. Most of the NanoVACQ's are available in Ex version. data sheet
PicoVACQ HT Ex and most of the PicoVACQ are available in Ex version. data sheet
MiniVACQ Temperature
The MiniVACQ is a temperature the ideal data logger for the washing-desinfection process.
The VACQ xFlat are thermocouple data loggers. They can be used for steam sterilization control. In this application the data logger is placed outside the autoclave. They can also be used inside depyrogenation process (dry heat) where the data logger is protected by a thermal shield.
The VACQ XFlat is available in 4 and 8 thermocouples version. Dimension of model 4 thermocouples: 80x104x10 mm
Radio transmission
All the NanoVACQ models are available with radio transmission and can be used inside autoclaves. Different wavelengths are possible: 433 MHz, 815 Mhz and 2.4 GHz These data loggers are ideal for real tme monitoring and process control.
i-VACQ Temperature
For monitoring temperature through a non metallic packaging without pulling out the data logger or for logging data inside a low pH liquid, TMI-Orion is proposing the i-VACQ, an induction data logger. This data logger has one internal temperature probe.
NanoVACQ 1Tc-2Tdi
.gif "i-VACQ (2).gif")
